In almost every fall, your hands go down first. It is a reflex nobody can switch off, which is why gloves are the piece of gear riders regret skipping the most. Picking motorcycle gloves Lebanon weather can actually handle is tricky, though: one pair rarely works for a humid August in Beirut and a foggy January morning in Metn.
This motorcycle gloves Lebanon guide compares summer, winter, touring and off-road gloves, explains the certification to look for, and shows how to choose the right size and keep them clean.
Quick answer: Most riders in Lebanon need two pairs of motorcycle gloves: a short ventilated summer glove for May to October and a waterproof insulated winter glove for the rainy months. Choose CE EN 13594 certified gloves with knuckle protection and a reinforced palm. Off-road riders need thin, flexible MX gloves; tourers benefit from long-cuff waterproof gloves.
Why Motorcycle Gloves Matter
Hands are small, complex and slow to heal. A slide on asphalt at city speed can strip skin from the palm in a fraction of a second, and the scaphoid bone in the wrist is a classic motorcycle fracture. Good gloves protect against both abrasion and impact.
They also make you a better rider. Gloves keep your grip consistent when your hands sweat, protect you from stones and insects, and keep fingers warm enough to work the brake and clutch properly in winter.
Motorcycle Gloves Lebanon Riders Need: Types Compared
| Type | Best for in Lebanon | Key features | Trade-offs |
|---|---|---|---|
| Summer | City riding May to October, coastal roads | Mesh or perforated panels, short cuff, knuckle protection | Little rain or cold protection |
| Winter | Rainy season, mountain roads, early mornings | Waterproof membrane, insulation, longer cuff | Bulkier, less feel on the controls |
| Touring | Long rides, Bekaa runs, mixed weather | Waterproof or all-season, long gauntlet, comfort padding | Warmer in summer traffic |
| Sport | Fast road riding, track days | Leather, hard knuckle and palm sliders, long cuff | Hot in the city |
| Off-road | Trails, motocross, enduro | Thin, flexible, ventilated, light knuckle padding | Limited impact and abrasion protection on the road |
Summer Gloves: Ventilation First
From June to September, coastal Lebanon is hot and humid, and stop-start traffic in Beirut or Jounieh makes it worse. A summer glove should have plenty of mesh or perforation, a short cuff that fits under the jacket sleeve, and still offer CE certified knuckle protection.
The T.UR G-Six is a ventilated summer glove certified CE EN 13594:2015, with IMPACTON knuckle protection and a reinforced microfibre palm. It costs $50 at the time of writing.
Winter Motorcycle Gloves for Rain, Fog and Altitude
Winter motorcycle gloves are where riders in Lebanon often underspend. Cold, wet hands are not just uncomfortable: they react more slowly on the brake lever. Rides up to Faraya, Kfardebian or through Dahr el Baidar can be much colder than the coast, and above roughly 1,500 m, snow closes some roads in winter. The Lebanese weather service is worth checking before a mountain ride.
Look for:
- A waterproof membrane rather than just a water-repellent coating.
- Insulation that does not make the glove too stiff to use the controls.
- A long cuff that goes over the jacket sleeve so rain does not run inside.
- A visor wipe on the finger, handy in fog in Metn and Kesrouan.
The T.UR G-One is a waterproof winter glove certified CE EN 13594:2015, with a Hydroscud membrane and thermoformed knuckle protection, $80 at the time of writing. For the rest of your cold-season kit, see our winter motorcycle gear guide.
Touring and Off-Road Gloves
Touring
For long days on the road, comfort matters as much as protection. Touring gloves add padding at the palm, pre-curved fingers to reduce fatigue, and often a waterproof membrane for changing weather between the coast and the mountains.
Off-road
Dirt riders need feel above all. Off-road gloves are thin, with a single layer palm for clutch and brake control, plenty of ventilation and light knuckle padding. The Eleveit X Legend 23 gloves cost $45 at the time of writing. For the full off-road setup, read our motocross gear guide.
CE Certification: What to Look For
Motorcycle gloves are certified to EN 13594. Level 1 covers most road gloves, while Level 2 has stricter requirements and is usually found on race gloves. A KP marking means the knuckle protection passed its own impact test. Our CE ratings guide explains every label in detail.
Motorcycle Gloves for Men and Women: Getting the Fit Right
Gloves should be snug without squeezing. When you make a fist, the material should not pull tight across the knuckles, and your fingertips should just touch the end of the fingers.
- Measure: wrap a tape around your palm just below the knuckles, without the thumb. Compare with the brand's size chart.
- Grip test: hold a handlebar-sized object. Nothing should bunch in the palm.
- Cuff: it should close securely so the glove cannot come off in a slide.
Motorcycle gloves for women
Women's gloves are cut with narrower palms and shorter fingers. Many women end up in men's sizes that are too long in the fingers, which reduces control. Choose a women's specific cut where available, such as the Spidi Flash-R Evo Tex Lady at $82 at the time of writing.
Motorcycle gloves for men
Most motorcycle gloves for men follow standard unisex sizing. Riders with wide palms should check the palm measurement first, rather than the finger length.
How to Clean Motorcycle Gloves
Sweat, dust and generator soot build up fast in Lebanon. Here is how to clean motorcycle gloves without damaging them:
- Check the label for the maker's instructions.
- Textile gloves: hand wash in lukewarm water with a mild detergent. Avoid the washing machine unless the label allows it.
- Leather gloves: wipe with a damp cloth and a leather cleaner, never soak them.
- Dry naturally: away from direct sun, heaters or a hairdryer, which can shrink leather and damage membranes.
- Condition leather once dry to keep it supple.
Frequently Asked Questions
What are the best motorcycle gloves for summer in Lebanon?
Short, ventilated gloves with mesh or perforated panels, a reinforced palm and CE certified knuckle protection. They keep your hands cool in coastal heat and stop-start traffic while still protecting you in a fall. Look for EN 13594 on the label and make sure the cuff fits under your jacket sleeve.
Do I need winter motorcycle gloves in Lebanon?
Yes, if you ride from November to March or head into the mountains. Among all the motorcycle gloves Lebanon riders buy, a winter pair is the one most often skipped. Rain, wind chill and altitude make hands cold quickly, which slows your reactions on the controls. A waterproof, insulated glove with a long cuff keeps you dry and warm on wet coastal roads and colder mountain routes.
How should motorcycle gloves fit?
Snug but not tight. Your fingertips should just reach the end of each finger, and the material should not pull across the knuckles when you make a fist. The cuff should fasten securely. Measure around your palm below the knuckles and compare with the size chart.
Can I wash motorcycle gloves in the washing machine?
Only if the label says so. Most textile gloves are best hand washed in lukewarm water with mild detergent, and leather gloves should only be wiped and conditioned. Always let gloves dry naturally, away from direct heat, to avoid shrinking leather or damaging waterproof membranes.
Are women's motorcycle gloves different from men's?
Yes. Women's gloves usually have narrower palms and shorter fingers. A men's glove that fits the palm can leave extra material at the fingertips, which reduces feel on the brake and clutch levers. Choose a women's specific cut when one is available.
Find Your Next Pair of Gloves
Browse all motorcycle gloves at GearD, from summer mesh to winter waterproof and off-road. For touring or adventure riding, also check our touring riding gear and adventure riding gear collections. Not sure of your size? Message the GearD team on WhatsApp with your hand measurement before you place your order.
